|
 |
| Plant
width inches (mm) |
A
Outside width inches (mm) |
B
Canvas width inches (mm) |
| 32"
(800) |
78"
(1985) |
36"
(914) |
| 39"
(1000) |
86"
(2185) |
45"
(1144) |
| 48"
(1200) |
94"
(2385) |
54"
(1370) |
|
|
Features
- Machines available in widths of 32"
(800 mm), 39" (1000 mm) & 48"
(1200 mm)
- Top & bottom Gauge Rolls of 300 mm
dia. Bottom Gauge Roll lifted / lowered through
imported Jactuators, keeping the top Gauge
Roll in a fixed position
- Side plates for Gauge Rolls are of 40 mm
thick mild steel plates
- Side plates for all other Conveyors are
of 20 mm thick mild steel plates
- Mechanical tensioning and tracking arrangements
provided for all canvases
- All Conveyors & Gauge Roll Units driven
by in-line helical geared motors fitted with
Frequency Controllers for speed variation
|
|
Features
- Machines available in widths of 32" (800
mm), 39" (1000 mm) & 48" (1200 mm)
- Top & bottom Gauge Rolls of 300 mm dia. Bottom S
Gauge Roll lifted / lowered through imported Jactuators,
keeping the top Gauge Roll in a fixed position
- Side plates for Gauge Rolls are of 40 mm thick
mild steel plates
- Side plates for all other Conveyors are of 20
mm thick mild steel plates
- Mechanical tensioning and tracking arrangements
provided for all canvases
- All Conveyors & Gauge Roll Units driven by
in-line helical geared motors fitted with Frequency
Controllers for speed variation
Options
- Outer covers in mild steel (painted) or stainless
steel
- Drive synchronisation through a PLC system using
Display Units
- Electronic gap sensing for Gauge Roll Unit
- Pneumatic tensioning and tracking arrangements
- Milk Spray Arrangement
- Pre-Sheeter behind the first Gauge Roll Unit
Gauge Roll Units with Web Tables
- Rolls are of 300 mm dia. made from chilled cast
iron with hardness between 50 to 60 HRC & ground to
mirror finish. The bottom roll is lifted / lowered
for accurate gap setting using imported Jactuators.
Each Gauge Roll is provided with a Web Table adjustable
in height. Feed Conveyor with a separate drive is
provided to feed the dough received from the Laminator
in to the first Gauge Roll Unit.
Relaxation Conveyor - Receives
the dough sheet from the Web Table of the final Gauge
Roll Unit. The sheet is relaxed by forming 'waves'
and is passed on to the next conveyor.
Rotary Cutting Web with Rotary Cutter (excluded)
- Provided with a 10" dia. food grade quality
rubber roller. The rubber roller has a lifting / lowering
arrangement. An endless web is fitted to carry biscuits
to the next conveyor
Scrap Conveyors - The system consists
of Scrap Pick-up Conveyor, Scrap Cross Conveyor, Scrap
Return Conveyor and Oscillation Conveyor to distribute
the dough evenly into the Hopper of Laminator or Pre-Sheeter.
Panner - Transfers Rotary cut
or Rotary moulded biscuits to the Feed End of the
Biscuit Oven
|
|
|
|
|
